Sizing Chart

When selecting the correct size garment it is important to ensure that the correct measurements are being used, and to remember that when purchasing a conti suit, the sizing of the jacket and trousers is as per the table below.

By following the simple table below, you will quickly and reliably identify the correct size to ensure a comfortable and safe fit. For a more detailed sizing chart for the jacket and trousers and detailed measuring instructions click here

			Inches				Centimeters
	Suit Size		Trouser Size	Jacket Size	SURCHARGE		Waist 2	Chest 1
	34		30	34		S	77	87
	36		32	36		M	82	92
	38		34	38			87	97
	40		36	40		L	92	102
	42		38	42			97	107
	44		40	44		XL	102	112
	46		42	46	10%		107	117
	48		44	48	15%	2XL	112	122
	50		46	50	20%		117	127
	52		48	52	25%	3XL	122	133
	54		50	54	30%		127	138
	56		52	56	35%	4XL	133	143
	58		54	58	40%		138	148
	60		56	60	45%	5XL	143	153
	62		58	62	50%		148	158

Detailed Sizing- Jacket

Both Standard & the Triple Stitch Share the Same Spec/Measurement Points

• Measure straight across from side seam to side seam at base of armhole
• Open the neck & measure along collar seam end to end
• Cuff circumference at cuff opening
• Measure from zipper head to bottom of the zipper
• Measure 10cm down from neck point
• Measure from shoulder point to sleeve hem edge
• Measure center back seam below collar to bottom hem edge

Fit Chest(metric)	Size (imperial)	1/2 chest	Collar length	Sleeve Opening	Zip Length	Across back	Over Arm	Centre Back leg
71	28	41.5	38.5	27	42	35.5	55	62
76	30	44	39.5	27.5	42	37.5	56	63
81	32	46.5	40.5	28	42	39.5	57	64
87	34	49	41.5	28.5	42	41.5	58	65
92	36	51.5	42.5	29	42	43.5	59	66
97	38	54	43.5	29.5	42	45.5	60	67
102	40	56.5	44.5	30	42	47.5	61	68
107	42	59	45.5	30.5	42	49.5	62	69
112	44	61.5	46.5	31	42	51.5	63	70
117	46	64	47.5	31.5	42	53.5	64	71
122	48	66.5	48.5	32	42	55.5	64.5	72
127	50	69	49.5	32.5	42	57.5	65	73
132	52	71.5	50.5	33	42	59.5	65.5	74
137	54	74	51.5	33.5	42	61.5	70	75
142	56	76	52.5	34	42	63.5	70.5	76
147	58	79	53.5	34	42	65.5	71	76
152	60	81.5	54.5	34	42	67.5	71.5	76
157	62	84	56.5	34	42	69.5	72	76
162	64	6.5	57.5	34	42	71.5	72.5	76
167	66	89	58.5	34	42	73.5	73

Detailed sizing Trousers

Both Standard & the Triple Stitch Share the Same Spec/Measurement Points

• Place the forefinger inside the waistband and apply sufficient tensions to stretch the waistband to its max length, measure along the center of the waistband
• Measured 20cm below the top of the waistband
• Measured from top of W/B to bottom hem edge
• Measured along the inside leg hem
• Measured from the zipper head to bottom of the zipper

Fit waist(metric)	Fit waist (imperial)	1/2 waist	1/2 zip	Sideseam	Inleg	Zip length
71	28	32.2	43.5	100	70	18
76	30	38.2	46	100	70	18
81	32	36.8	48.5	100	70	18
87	34	39.1	51	103	73	18
92	36	41.4	53.5	103	73	18
97	38	43.7	56	104	74	18
102	40	46	58.5	104	74	18
107	42	48.5	61	106	76	18
112	44	50.6	63.5	106	76	18
117	46	52.9	66	106	76	18
122	48	55.2	68.5	106	76	18
127	50	57.5	71	106	76	18
132	52	59.8	73.5	106	76	18
137	54	62.1	76	106	76	18
142	56	64.566.7	78.5	106	76	18
147	58	69	81	106	76	18
152	60	71.3	83.5	106	76	18
157	62	73.6	86	106	76	18
162	64	75.9	88.5	106	76	18
167	66	77.9	91	106	76	18

Detailed sizing Boiler Suits

• Open the neck & measure along collar seam end to end
• Measure straight across from side seam to side seam at base of armhole
• Measure along the center of the waist
• Measured from top of waist to bottom hem edge
• Measured along the inside leg hem
• Measured along hem edge
• Measure 8cm down from neck point
• Measure center back seam below collar to waist
• Measure along the base of armhole to hem edge
• Cuff circumference at cuff opening

Fit waist(metric)	Fit waist (imperial)	1/2 chest	1/2 waist	Sideseam	Inleg	Centre back length
71	28	40.5	39.1	96.9	69.2	84.5
76	30	43	41.5	96.9	69.2	84.8
81	32	45.5	434	96.9	69.2	85.1
87	34	48	4.8	98	69.8	86.1
92	36	50.5	48	100	70.8	87.6
97	38	58	50.4	102	71.9	89
102	40	55.5	52.8	103	71.4	90
107	42	58	55.2	104	72.9	90.9
112	44	60.5	57.6	105	73.5	91.9
117	46	63	60	106	74	92.9
122	48	65.5	64.2	107	74.1	93.3
127	50	68	64.8	107	74.5	94.3
132	52	70.5	67.2	107	74.5	94.7
137	54	73	69.6	107	74.7	95.2
142	56	75	72	107	74.8	95.6
147	58	78	74.4	108	75.5	96.6
152	60	80.5	76.8	108	75.4	97
157	62	83	79.2	108	75.4	97
162	64	85.5	81.6	108	75.5	97.4
167	66	88	84	108	75.6	98.8

Garment specifications, features and benefits

Standard Garment

CONTI JACKET STANDARD

• Front panels and yokes edges are surged (Over lock)
• All pocket ends, sleeve ends, zipper, collar and lapel of the yokes are securely bar tacked.
• All seams are safety stitched
• Measurements click here

CONTI JACKET STANDARD

• All seams are safety stitch except back seam triple stitch
• All pressure areas such as pocket edged, fly, croch and belt loops are securely bar tacked
• Measurements click here

CONTI JACKET TRIPLE STITCH

• All seams are triple stitched
• Front panels and yokes edges are surged (Over lock)
• All pocket ends, sleeve ends, zipper, collar and lapel of the yokes are securely bar tacked.
• Measurements click here

CONTI TROUSER TRIPPLE STITCH

• All seams are triple stitch
• All pressure areas such as pocket edged, fly, croch and belt loops are securely bar tacked
• Measurements click here

Boiler Suit

• All pocket ends, collar,sleeve ends, croch are securely bar tacked
• Back seams, shoulder waist are double stitched
• All other seams are safety overlock
• TKT 80’ Spun polyester thread is used for sewing
• Measurements click here